|
Usuarios conectados
Actualmente hay 5834 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Chapter 2. Basic Functions
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery pack or connect the phone to an external power source such as the cigarette lighter adapter or car kit. 2. Press for a few seconds until the red light at the top of the phone flashes. If you want to make a call, fully extend the antenna for optimum performance.
As with any other radio device, avoid any unnecessary contact with the antenna while your phone is on.
4. Press to disconnect the call. 5. �This phone has been restricted� displayed on your screen means that outgoing call restricted mode is turned on. If you want to turn off this function, follow the steps below. [MENU] [7] Security Lock code insert [2] Restrict �No� [OK]
Correcting Dialing Mistakes
If you have misdialed a number, press Soft Key 2 CLR once to erase the last entered digit or hold down Soft Key 2 CLR for at least one second to delete all digits.
Turning the Phone Off
1. Press and hold until �Good Bye~� text is displayed on the LCD, and then release the button. 2. Protect the antenna by pushing it back into the phone, if extended.
Receiving Calls
1. When the phone rings, open the flip cover or in case the flip cover is closed, press any key (except & Side Keys) to answer. If you press the button once when you receive a call, you can hold on the present call, and bell sound or vibration stops. If you press the button twice, the present call is terminated. Press Side Keys ( ) when you receive a call to, mute the volume of the ringer. 2. Press to disconnect the call.
Making a Call
Whenever you make a call, follow these simple steps:
1. Make sure the phone is turned on.
If not, press .
2. Enter the phone number with area code, if needed. 3. Press .
If the phone is locked, enter the lock code and press . �Call Failed� indicates that the call did not go through.
16
17
|
|
|
> |
|